14 Yard vs 20 Yard Dumpster
Both sizes are distinct entries in the Canadian planning catalogue. Choose between them from the measured loose load and the calculator's returned context, not by substituting a nearby yard label or assuming that more space permits more weight.
Check your measurements with the regional calculatorCompare nominal capacity
20 yd³ provides about 43% more nominal volume than 14 yd³: an extra 6 yd³. This is volume, not allowable weight.
| Nominal capacity | When it may suit |
|---|---|
| 14 yd³ | May be sufficient when the Canadian calculator's ordinary planning result supports this capacity and the provider confirms stock, acceptance and fit. |
| 20 yd³ | May add useful volume headroom for a larger ordinary pile or uncertain bulky-item packing; provider weight and material limits still apply. |
These entries come from the regional SizeSolve planning catalogue, not a guarantee of local stock or physical fit. Neither bare capacity figure is a sizing recommendation: use the calculator's returned planning context.
Confirm the actual Canadian yard option
The 14-yard entry is a specific nominal capacity in SizeSolve's Canadian production catalogue. It is not another name for a 15-yard option. Confirm what the local company actually offers rather than swapping labels or assuming that the planning list describes every fleet.
- Use the full Canadian calculator context if another catalogue size is more relevant than this pair.
- A yard capacity does not establish the opening dimensions needed for an intact bulky item.
Metre measurements can produce a yard-based result
The Canadian page starts pile dimensions in metres while its container catalogue uses cubic yards. Measure a safe, already-loose pile's rectangular envelope with length, width and height in the same selected unit. The calculator handles supported unit conversion; do not relabel a metre measurement as yards.
Use realistic low, best and high dimensions when the pile is irregular. SizeSolve carries your entered range and conservative planning headroom, not an automatic air-gap correction. A room's square-metre floor area is not loose waste volume, and bare nominal equality is not an automatic sizing recommendation.
Check the materials before choosing more volume
Describe the actual household, garden or renovation mixture. Concrete, soil, brick, rock and asphalt require relevant dense-material screening. They may need provider verification even if a dumpster would not be full by volume. Suspected special material can require a different disposal route altogether.
- Do not use the larger entry to bypass a heavy-material warning.
- Confirm accepted materials, weight, loading conditions, physical fit and delivery access with the local provider.
- If the loose amount is unknown, improve the information instead of choosing from a project label alone.
Questions about this decision
Is 14 yards the same as 15 yards?
No. They are separate nominal entries in the Canadian planning catalogue. Confirm the actual offered capacity locally rather than treating the labels as interchangeable.
Why are the pile measurements in metres?
Input length units and container volume units serve different purposes. Choose the unit on your tape; SizeSolve converts supported inputs for the Canadian cubic-yard planning catalogue.
Does the extra volume increase the permitted load weight?
This comparison makes no weight-allowance claim. Confirm the provider's conditions for the disclosed materials and follow any provider-verification or special-disposal result.
Related sizing guides
Plan from measurements, then confirm locally
Read the SizeSolve methodology for assumptions and limitations, or return to the homepage to choose a different country.
Measure your waste with the Canadian dumpster calculator